100 sq ft
small laundry or mudroom
From
$1,000
to $1,500
- Polyurea flake or solid color
- Diamond-ground prep included
- Done in an afternoon
- 15-year warranty
Utility Room Coatings · Hudson, WI · Est. 2003
Utility Room Coatings in Hudson, Wisconsin.
Hudson sits on the Wisconsin side of the St. Croix River, directly across from Stillwater MN, and is the closest major town to the Twin Cities along I-94. About 25 minutes northwest of River Falls. We install polyurea + polyaspartic floor coatings for Hudson homeowners — diamond-ground prep, custom flake colors, 1–2 day install, written 15-year warranty. Wide range — historic Victorians and early-20th-century homes near downtown and North Hill, high-end St. Croix River-front estates, and post-1990 suburban developments on the east and south edges.
Utility Room Coatings in Hudson
What an install looks like in Hudson.
Hudson has a different garage-floor profile than River Falls. The North Hill and downtown areas have older slabs from the 1920s-1960s that often need crack repair and spalling patch before coating — we handle that in prep. The high-end river-front and Willow River homes often have larger 3-car garages with custom flake color preferences. The post-1990 suburban developments south and east of town have newer slabs that grind cleanly. We've done installs near Birkmose Park, Stagecoach Trail, and along the lakefront. A common Hudson concern is lower-level moisture from St. Croix River proximity — we run an MVER test on every basement or walk-out garage install in town to make sure the slab is dry enough for a standard polyurea install.
Neighborhoods we work in
- North Hill (historic)
- Downtown waterfront
- Willow River
- South Hudson
- Stagecoach Trail
- Birkmose Park area
100SQ FT
Min job size
Or bundle with larger work
FewHRS
Typical install
Most rooms done in an afternoon
15YR
Written warranty
Same as garage + basement
5.0★
Google rating
From real homeowners
Why we don't install epoxy in Hudson
Why a coating beats concrete paint or VCT in a utility room.
Most utility rooms have one of three floor finishes: bare concrete, concrete paint (peeling within a year or two), or vinyl tile (lifting at edges from moisture). All three fail in the same conditions utility rooms see daily — water, detergent, dropped tools, road salt. A polyurea coating ends the cycle: it bonds mechanically into the concrete, doesn't peel, doesn't lift, doesn't soak up spills.
Concrete Paint / DIY Floor Kit
What's typically installed
- Sits on top of the slab. Concrete paint is a surface coating with a chemical bond. No diamond grinding, no mechanical bond, no longevity.
- Peels in traffic areas within months. The cycle: paint, looks great for 6 months, traffic patterns peel through to bare concrete, repaint, repeat. Mudrooms see this fastest because of road salt and water.
- Soaks up detergent + bleach spills. Painted floors stain. Bleach spots show up white. Detergent residue dulls the surface.
- VCT lifts at the edges. Moisture from the slab gets under vinyl tile and the corners curl. Common in basement laundry rooms.
- You're re-doing it every 2-3 years. The math doesn't work over a 10-year window — repaint cost + labor exceeds a single polyurea install.
Polyurea + Polyaspartic
What we install instead
- Bonded into the slab. Diamond-ground prep + polyurea basecoat creates a mechanical bond — the coating is fused into the concrete pores, not sitting on top.
- 15-year coating, no re-application. Same warranty as our garage and basement installs. Done in a few hours, lasts the next 15 years.
- Wipes clean. Stains don't stick. The polyaspartic topcoat is non-porous. Detergent, bleach, mud, dog water, oil drips — all wipe up clean.
- Seamless surface. No grout lines, no tile edges, no seams where dirt or water collects.
- Bundled, it's cheap. $400-800 added cost when bundled with a garage install vs $1,500+ standalone. Most homeowners bundle for the math.
Bottom line: utility rooms see the same conditions as a garage or basement, just at smaller scale. Same coating system applies. Same warranty. The only thing that changes is the room size and (often) the install duration — most utility rooms are done in an afternoon.
Hudson Pricing
Utility Room Coatings cost in Hudson, WI: $7–9 per sq ft.
Standalone pricing is below. Most homeowners save 30-50% by bundling utility rooms with a larger garage or basement install — equipment is already on-site, so the marginal cost is materials + 2-4 hours of crew time. Mention any adjacent utility spaces at quote time.
Add-on to garage/basement
100-200 sq ft
From
$400
to $1,200
- Same crew, same day
- Significant savings vs standalone
- Mention at on-site quote
- 15-year warranty
300+ sq ft
large workshop or hobby room
From
$1,800
to $2,700
- Polyurea flake or solid color
- Bundle pricing on adjacent rooms
- Done in 1 day
- 15-year warranty
Standalone minimum is ~100 sq ft (jobs smaller than that don't pencil). For utility rooms attached to a larger project, there's no real minimum — we'll add a 30 sq ft mechanical closet to a basement install for the cost of materials. Send four photos and Dave will quote bundle pricing same-day.
The 6-step install
How we install your floor in Hudson.
Same checklist on every floor. The reason our coatings still look new at year ten when the cheap stuff peeled in year two.
-
01
Diamond grinding
Same diamond-ground prep as our garage and basement installs. Removes old paint, sealers, contamination, and the weak top layer of concrete. HEPA-vacuum dust collection so we can prep an interior space without dust escaping into the rest of the house. -
02
Crack & spalling repair
Older utility-room slabs often have spalling, paint residue, or cracks from years of foot traffic + minor leaks. Cracks get flexible polyurea filler, spalled areas get patched with polymer-modified compound. Routine. -
03
Polyurea basecoat
Same polyurea basecoat as larger jobs. Full mil thickness, structural layer of the system, fast-cure for short install windows. -
04
Flake or solid-color coat
Decorative flake (your color choice) or solid pigment color. Anti-slip aggregate available for laundry rooms, dog wash stations, or other surfaces likely to see standing water. -
05
Polyaspartic UV topcoat
UV-stable polyaspartic clear topcoat seals the system. Resists detergents, bleach, water, oil, and household chemicals. Wipes clean with a mop. Walk on it in 24 hours. -
06
Same 15-year warranty
Same written 15-year warranty as garage and basement installs. Lifetime UV-fade warranty on the topcoat. Real warranty document handed to you at install completion.
Hudson questions
Common questions for Hudson homeowners.
Do you install in the historic homes on North Hill?
Yes — those are some of our most rewarding jobs. Older slabs need more prep (diamond grinding to remove old paint, crack repair for settlement, spalling patch) but the polyurea system bonds reliably to a properly prepped substrate. We've done garages built in the 1930s that look brand new after coating.
What about basement coatings near the St. Croix River — is moisture a concern?
Lower-level slabs in Hudson can transmit slightly more moisture than inland sites. We run an MVER (moisture vapor emission) test before coating any below-grade surface in Hudson. Most slabs clear for a standard install; some get a moisture-mitigation primer first. Either way you know up-front what your slab needs.
How fast can you get to Hudson from River Falls?
About 25 minutes via I-94. We typically schedule Hudson installs in the same week as a River Falls job to amortize travel. Same-day photo quotes are normal — Dave will text back a real number after seeing four photos of your slab.
How much does a laundry room or utility room floor coating cost?
Standalone, a 100-200 sq ft utility room runs $1,000-$1,800 fully installed. Bundled with a garage or basement install, that drops to $400-$1,200 because equipment and crew are already on-site. Most homeowners save 30-50% by bundling.
Can you do just a small laundry room (100 sq ft)?
Yes — 100 sq ft is our standalone minimum. Smaller than that doesn't pencil for a standalone job. But if you're booking a garage, basement, or mudroom install at the same time, we'll add a 30 sq ft mechanical closet or pantry for the cost of materials only.
Is the floor really better than concrete paint?
By 15× on lifespan. Concrete paint is a surface coating with chemical bond — peels in months under traffic. Polyurea is mechanically bonded into the slab via diamond grinding, doesn't peel, lasts 15+ years. The math: 5-7 paint re-applications over 15 years vs one polyurea install. Polyurea wins on lifecycle cost.
Can you coat a basement laundry room with potential moisture?
Yes — same moisture-tolerant polyurea system we use for full basement installs. We test the slab for moisture (MVER) before quoting, so we know up-front whether it needs a moisture-mitigation primer underneath. Most basement laundry rooms don't, but we test to be sure.
Will it handle bleach, detergent, and washing machine overflow?
Yes — the polyaspartic topcoat is chemical-resistant to household concentrations of bleach, detergent, and laundry chemicals. Standing water from washing machine overflow doesn't damage the coating; just wipe it up. Far better than VCT (which lifts) or paint (which stains).
Can the floor be slip-resistant for a dog wash or wet area?
Yes — anti-slip aggregate is broadcast into the topcoat for any utility room expected to see standing water (dog wash stations, mudrooms with frequent wet feet, laundry rooms with overflow risk). Texture level is dialed at the on-site quote.
How long does a utility room install take?
A 100-200 sq ft room runs about 3-4 hours including drying time between coats. Walk on it the next morning, full use within 48 hours. Most homeowners don't need to plan around the install — we work around your schedule.
Will it look like a garage floor or more like living space?
Your call — flake colors range from "industrial" (gray + black flake) to "living-grade" (warm browns and tans, light cream blends). Mudroom installs typically use warmer/lighter colors to feel like part of the lived-in house; laundry rooms often go neutral; workshops go industrial. Dave brings physical color samples to every on-site quote.
What's the warranty on a smaller utility room install?
Same written 15-year warranty as our garage and basement installs — there's no "smaller job, smaller warranty" thing. Lifetime UV-fade warranty on the topcoat. Real warranty document handed to you at install completion.
Can I bundle multiple utility rooms together?
Yes — bundle pricing scales with each additional room added to a single visit. Garage + laundry + mudroom on the same day runs cheaper per room than three separate installs. Mention every adjacent utility space at the on-site quote and Dave will price the package.
More in Hudson
All the floor coatings we install in Hudson, WI.
Whatever the slab — garage, basement, patio, mudroom, commercial — same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty. Bundle pricing if you book multiple rooms in one visit.
Talk to Dave
Ready for a utility room coatings install in Hudson?
Send Dave four photos of your slab — he'll text back a real Hudson number same-day. No salesperson, no quote-bot, no follow-up calls.
- Free on-site measurement in Hudson
- Written 15-year warranty
- No subcontractors, no upsells