1,500 sq ft
retail showroom or service bay
From
$10,500
to $13,500
- Polyurea flake or solid color
- Off-hours install scheduling
- COI provided on request
- Done in 1-2 days
Commercial Floor Coatings · River Falls, WI · Est. 2003
Commercial Floor Coatings in River Falls, Wisconsin.
River Falls sits along the Kinnickinnic River in Pierce County, about 30 miles east of the Twin Cities on Highway 35. It's the home base for our shop — every install in the metro area starts and ends here. We install polyurea + polyaspartic floor coatings for River Falls homeowners — diamond-ground prep, custom flake colors, 1–2 day install, written 15-year warranty. Mix of historic homes near downtown and the UW-River Falls campus, post-1990 suburban builds north and east, and farmstead conversions on the city edges.
Commercial Floor Coatings in River Falls
What an install looks like in River Falls.
As Dave's home base, River Falls is where we install the most floors per year. We know the housing stock — older homes near the UW-River Falls campus often have 1950s-1970s slabs with typical settlement cracks; newer subdivisions north of town have post-2000 slabs that grind up cleanly. We've coated garages on every major street: Cascade Avenue, South Main, Division, Pearson Drive. Most River Falls homeowners hear about us from a neighbor whose floor we did. If you've seen a polyurea flake garage floor in town, there's a good chance it came from our shop. Same-day quotes are routine here because we're literally based in town.
Neighborhoods we work in
- Downtown / Cascade Avenue
- University area (UW-River Falls)
- Mound View
- Riverside / Kinni
- South Main
- Northwoods
20+
Years installing
Commercial coatings since 2003
24-48HRS
Return to service
Off-hours + weekend installs
$2M
Liability coverage
Certificates available
15YR
Written warranty
Same as residential
Why we don't install epoxy in River Falls
Why polyurea makes more sense than epoxy in a commercial space.
Commercial floors fail in different ways than residential. Forklift point-loads, hot tire pickup from work vehicles, chemical exposure from oils and degreasers, and the financial cost of a closed bay. Standard epoxy can't handle any of those reliably. Polyurea is what industrial spaces have been moving to for the last decade — and what we install exclusively.
Standard Commercial Epoxy
What most commercial installers still apply
- Chips under forklift point-loads. A loaded forklift puts thousands of pounds on a small wheel contact patch. Epoxy fractures along the load lines.
- Yellows under fluorescent + sun. Showroom floors photograph terribly after the first year. Customer impression matters.
- Hot tire pickup on shop floors. Vehicles pulling into service bays hot in summer lift the coating where the tires sit.
- 3-7 day cure = lost shifts. Standard epoxy is solvent-borne and slow. A retail floor closed for a week is real revenue loss.
- VCT under it ages out. Commercial spaces still using vinyl composition tile waste hours every quarter on stripping + waxing. The math doesn't work past year three.
Polyurea + Polyaspartic Industrial
What we install instead
- Forklift-rated abrasion + impact. Polyurea's tensile strength handles point-loads epoxy can't. Standard rating for warehouses and manufacturing floors.
- UV-stable for life. Polyaspartic topcoat does not yellow under fluorescent, sodium-vapor, or sunlight. Showroom floors stay showroom-grade.
- Heat + chemical resistant. No hot-tire pickup, no peeling around oil drips, withstands degreasers and sanitizers used in daily wash-down.
- 24-48 hour return to service. Off-hours + weekend installs are standard. Most commercial floors run prep + basecoat + topcoat over a single Saturday-Sunday and the team walks in Monday to a sealed floor.
- VCT replacement that's permanent. Sweep and mop instead of strip and wax. Eliminates the recurring labor cost of vinyl tile maintenance, often paying back the install cost within 18-24 months on labor savings alone.
Bottom line: polyurea costs the same or slightly more than a contractor-grade commercial epoxy install per square foot, lasts 3-5× as long, requires no maintenance, and doesn't close your operation for a week to install. Every commercial customer we've installed for since the polyurea switch (2010) is still on the original floor.
River Falls Pricing
Commercial Floor Coatings cost in River Falls, WI: $7–9 per sq ft.
Commercial pricing varies more than residential because mobilization and crew time amortize across larger jobs. Below are typical ranges by project size + use case. Every commercial install includes diamond-ground prep, polyurea + polyaspartic system, COI on request, and the 15-year warranty. Larger jobs get phased install scheduling and milestone reporting.
5,000 sq ft
warehouse or auto shop
From
$30,000
to $40,000
- Polyurea solid color industrial
- Phased install (keep operating)
- COI + written milestone schedule
- Done in 2-3 days
10,000+ sq ft
warehouse, manufacturing
From
$50,000
to $70,000
- Bid by scope (per sq ft drops)
- Phased install + traffic lanes
- Full project documentation
- Multi-day or weekend window
Food-service and USDA-rated installs (integral cove base, anti-slip aggregate) run $8-11 / sq ft regardless of size. Send photos + square footage and Dave will work up a written quote with line-item scope, typically within 48 hours.
The 6-step install
How we install your floor in River Falls.
Same checklist on every floor. The reason our coatings still look new at year ten when the cheap stuff peeled in year two.
-
01
Site walkthrough + scope
For commercial projects, we start with an on-site walkthrough to scope conditions: existing coating type, slab condition, equipment that needs to stay in place, traffic patterns, and operational constraints (when can we install, what areas need to stay accessible). Written scope and milestone schedule out to you within 48 hours. -
02
Diamond grinding
Industrial diamond-tooled grinders, larger than residential equipment, with HEPA-vacuum dust collection so we can prep occupied buildings without making the rest of the space unusable. Removes existing coatings, sealers, oil contamination, and the weak top layer of concrete. -
03
Crack repair + slab prep
Cracks filled with flexible polyurea joint filler. Spalled areas patched with polymer-modified compound. Saw-cuts and control joints either filled flush or maintained as visible — depends on the use case. -
04
Polyurea basecoat (forklift-rated)
Industrial-grade polyurea basecoat at higher mil thickness than residential installs. This is the structural layer that handles point-loads, equipment traffic, and impact resistance. -
05
Flake or aggregate broadcast
Decorative flake (showroom-grade), solid color (industrial), or anti-slip aggregate (food-service / wet environments). Density and aggressiveness calibrated to the application and traffic load. -
06
Polyaspartic UV topcoat + warranty
UV-stable polyaspartic topcoat seals the system. 15-year written warranty against chip, crack, peel under commercial use; lifetime UV-fade warranty on topcoat. Final walkthrough with operations team before we leave.
River Falls questions
Common questions for River Falls homeowners.
Do you serve the UW-River Falls campus area and downtown homes?
Yes — those are some of our most common installs. Older slabs near the campus and downtown often have settlement cracks that need flexible polyurea filler before coating. We've also done plenty of newer-construction installs on the city's north and east sides where slabs grind up faster.
How fast can you install a garage floor in River Falls?
River Falls is our home base, so installs here are scheduled fastest — typically 1-2 weeks out from quote. Send four photos and Dave will text back a real number same-day. The install itself runs 1-2 days for most residential garages.
Have you done floors near Lake George or Kinnickinnic State Park?
Yes — we've done dozens of installs throughout the Mound View, Riverside / Kinni, and Northwoods neighborhoods. Many of those homes back up to the Kinni or sit close to Lake George. The polyurea system handles the slightly higher humidity from being near the water without issue.
How long will my commercial space be closed during the install?
Most commercial installs run prep + basecoat + topcoat over a single weekend (Friday night through Sunday). Walk-on Monday morning, full operation Monday or Tuesday. Phased installs (keep half the floor in service while the other half cures, then swap) are available for spaces that genuinely can't close. Larger jobs (5,000+ sq ft) typically need 2-3 days but can be scheduled around your operating hours.
How much does a commercial floor coating cost per square foot?
Standard commercial polyurea installs run $6-8 per square foot for solid-color industrial work and $7-9 per square foot for decorative flake / showroom-grade. Food-service installs with integral cove base + anti-slip aggregate run $8-11 / sq ft. Per-sq-ft cost drops on larger jobs (10,000+ sq ft typically lands at $5-7 / sq ft) because mobilization amortizes.
Do you provide a certificate of insurance?
Yes — $2M general liability coverage, COI provided on request. Standard for commercial work where property managers, GCs, or corporate insurance departments require it. Larger jobs also come with a written scope, milestone schedule, and progress photos.
Is polyurea worth the upgrade vs commercial epoxy?
Yes, in commercial settings the gap is bigger than in residential. Forklift-rated abrasion, hot-tire safety, faster return to service, and lifetime UV stability all matter more in commercial use. Per-sq-ft cost is roughly equivalent to professional commercial epoxy; lifespan is 3-5× longer; and the 24-48 hour return-to-service vs epoxy's 3-7 days saves real money on closed-operation cost.
Can polyurea handle forklift traffic?
Yes — that's actually one of polyurea's strongest applications. The basecoat goes down at higher mil thickness for industrial installs, and polyurea's tensile strength handles point-loads that fracture epoxy. Standard for warehouses, manufacturing floors, and shipping bays.
Will a polyurea floor work in a commercial kitchen or food service?
Yes — we install seamless polyurea with integral cove base for food-service applications. No grout lines or floor-wall seams where bacteria collect. Slip-resistant aggregate standard for wet kitchen environments. Withstands daily wash-down with commercial degreasers and sanitizers. USDA-compatible build.
Can we replace VCT (vinyl composition tile) with polyurea?
Yes, and it's one of the more financially obvious upgrades. VCT requires quarterly stripping + waxing — that recurring labor cost adds up fast. Polyurea is sweep-and-mop, no maintenance. The install pays back within 18-24 months on labor savings for most commercial spaces, and the floor lasts 15+ years vs VCT's 7-10.
Do you handle larger commercial projects (10,000+ sq ft)?
Yes. Larger commercial jobs run as phased installs over multiple days, typically with written milestone schedules and progress photos at each phase. We've installed in warehouses, manufacturing facilities, and large retail. Per-sq-ft cost drops on larger jobs because mobilization amortizes — typically $5-7 / sq ft for 10,000+ sq ft.
What happens if the floor gets damaged during use?
Spot repairs are straightforward — diamond grind the damaged area, re-coat with the same system, blends in cleanly. Most damage from heavy use is impact (dropped equipment, dragged pallets) and is covered for repair under the 15-year warranty under normal use. Abuse, deliberate damage, or improper chemical exposure (battery acid, paint stripper, etc.) is excluded.
Can the floor color match our brand?
Yes — flake blends are available in dozens of colors and we can match logo or brand colors closely. Solid-color installs allow custom pigment matching. Auto dealers, retail brands, and franchise operators often spec the floor color to match showroom signage or brand standards. Bring the color spec at quote time.
More in River Falls
All the floor coatings we install in River Falls, WI.
Whatever the slab — garage, basement, patio, mudroom, commercial — same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty. Bundle pricing if you book multiple rooms in one visit.
Talk to Dave
Ready for a commercial floor coatings install in River Falls?
Send Dave four photos of your slab — he'll text back a real River Falls number same-day. No salesperson, no quote-bot, no follow-up calls.
- Free on-site measurement in River Falls
- Written 15-year warranty
- No subcontractors, no upsells